Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to board connector, Female, single groove, mating height=1.5~2.0mm connector.
Terminal connector general use precautions
1. The purpose of producing the "terminal connector" is to turn on electrical and electrical signals, so do not use it for a part of a member or a member premised on the application of mechanical force to the joint (contact portion) of the "terminal connector".
2. "Terminal connector" is divided into two types: wiring for wiring in the device and wiring between devices. The "terminal connector" for wiring in the device can only be used for the "internal body of the device" specified in the Electrical Appliances Safety Law. Wiring, please handle it properly on the equipment side to avoid contact with the general public.
Product Information:
1.Series NO:0.5mm Board to Board connecter
2.mating Height:
H=1.5mm/2.0mm/2.5mm.
3.Packing
T:Tube A:Tray
B:Bag U:Tube+CAP
R:tape&Reel
W:tape&Reel+CAP
Electrical
Current Rating:0.5A
Voltage Rating:50V AC/DC
Contact Resistance:50milliohm Max
Insulation Resistance:100Megohm Min
Operation Temperature:-20°C to +105°C
Housing Material:PA9T+30%G.F(UL94V-0)
Contact Material:Phosphor Btonze
Contact plating:Au or Sn over Ni