Product name: 1.0mm FPC NON ZIF Right Angle DIP Dual contact standard(Reverse)type FPC1.0-XXRTDXXX0
Manufacturer :ANTENK ELECTRONICS., CO. LTD.
Super-fine 1.0 mm pitch and small-size FFC/FPC connectors with ZIF, non-ZIF, slider, flip actuator and FPC-to-board styles and a variety of circuit sizes deliver both high reliability and speedy data rates.
Easy-on FFC/FPC board connector soldering, FPC LCD connector, Fpc Connector pinout, 1mm pitch, slider series, right angle SMT bottom contact, 4.8mm height, 4-40 pin FPC connector type, FPC connector full form 40 pin, gold plating, contact tail length 2.5mm.
As the market trends towards miniaturization, FPC connectors have been developed to meet the challenges of this expanding market, which demands smaller centerline or pitch spacing, lower profile heights, and lighter interconnect solutions. Antenk's FPC solutions are reliable interconnects that use an actuator to secure the cable termination, and are filed terminatable (require no tooling) and are available in centerline spacing of 0.25mm, 0.3mm, 0.5mm, 1.0mm and 1.25mm, and incorporate a low profile height and light-weight features.
Specification:
Insulator | Nylon 46, UL94V-0 |
Contact | Copper Alloy |
Plating | Tin plated over nickel |
Current rating | 0.5 AMP |
Dielectric withstanding voltage | 500V AC min. |
Insulation resistance | 800MΩ min. |
Contact resistance | 20MΩ max. |
Voltage rating | AC/DC 50V (200Hz) |
Temperature range | -20℃~+85℃ |