Manufacturer : ANTENK ELECTRONICS.,CO LTD.
ANTENK D-Sub connectors / contacts are manufactured in plug or receptacle gender with 50 Ohm impedance. D Sub contacts are available in straight or right angle versions, as well as, mount-less options. These D-Sub contact designs include crimp/solder, solder or solder/solder attachment methods.
The type connector has been used in many applications as a multi-way connector, but it is probably most widely known as the connector used for RS-232 serial links. In fact the D-type connector was used for the serial link on most computers for many years, and today variations of D-type connectors are still found on most computers.
SPECIFICATION
Material:
Housing: Temperature Thermoplastics,PBT+G.F UL 94V-0
Contact: Brass or Bronze
Shell: 0.35T Steel Nickel Plating All Area
Electical Characteristics:
Current Rating :5A
Contact Resistance:20 Milliohms Max
Withstanding Voltage:500V AC For 1 Minute
Insulation Resistance :1000 Mehms Min
Operating Temperature:-55℃ to +105℃